Long sofa table provides both aesthetic and functional features to all living rooms or family rooms. There are many styles to choose from in different shapes and sizes. Design and build your own table that has stability, simplicity and affordability
Instructions
20 Photos Gallery of: Building Long Sofa Table
Use a strip of tape to grind all surfaces on the finished pine. Make the parishes the long sofa table leg by placing the two legs on either side of the leg brace length. Measure so that the legs will be placed 1/2 inches active from the end of each side of the leg support length. Align two holes with a small drill and drill through the width of the leg support near the center of each intended leg location. Angle the boreholes.
Place each leg under leg support and screw 3- inch long wood screws into the pre-drilled holes pilot and make sure to lower the conical heads in the soft pine forest. Repeat for the second leg and then make another leg with the remaining two legs, brace and 3-inch wood screw. Place the intended top of the long sofa table facing down and measure 4 inches inward from each end of the table top length. Make a small pilot project hole through the width of the leg support on the inside corner of each leg. Make another pilot hole in the middle of the leg support length, but on the opposite side of the other two holes.