Replace garage door opener – Replacing a broken wire in a door garage torsion spring requires special tools and an understanding of how these work doors . Torsion springs lift the weight of the garage door. When the door is down, the springs are under extreme stress. Purchase a pair of winding bars 18 inches to work in torsion springs. Winding bars are steel solid and fit the spring winding cones perfectly. If you do not have winding bars or are not completely comfortable doing this repair, call a professional. Replacement cables are available in centers and home improvement door sealants. Measure the width and height of your door to get the right cable.
Replace garage door opener, close the door completely and use the lock on the door, if the door is not closed. Often, the cable breaks when the door is down. If your door operates with a garage door opener, press the button to close the door wall. Place a ladder under the engine so you can reach the cord. Unplug the power cord from the electrical outlet in the ceiling. This will prevent someone from accidentally using the opener while you’re working the door.
12 Photos Gallery of: How To Replace Garage Door Opener
Replace garage door opener, place the ladder next to the door under the torsion spring. Put a winding bar into the hole in the side of the cone winding. The cone winding spring is the end pointing towards the door. The stationary cone is connected to the mounting bracket above the central half of the door.